# Copyright 2001-2015, Stephen Fryatt (info@stevefryatt.org.uk)
#
# This file is part of Locate:
#
#   http://www.stevefryatt.org.uk/software/
#
# Licensed under the EUPL, Version 1.1 only (the "Licence");
# You may not use this work except in compliance with the
# Licence.
#
# You may obtain a copy of the Licence at:
#
#   http://joinup.ec.europa.eu/software/page/eupl
#
# Unless required by applicable law or agreed to in
# writing, software distributed under the Licence is
# distributed on an "AS IS" basis, WITHOUT WARRANTIES
# OR CONDITIONS OF ANY KIND, either express or implied.
#
# See the Licence for the specific language governing
# permissions and limitations under the Licence.

TaskName:Locate
Version:%0 (%1)

TaskSpr:!locate

SupportURL:http://www.stevefryatt.org.uk/software/locate/

ResWindTitle:Objects found named '%0' (%1)
SizeFlag:S
DateFlag:D
AgeFlag:A
TypeFlag:T
AttrFlag:O
ContFlag:C

Unknown:Unknown
Untyped:Untyped
File:File
Dir:Directory
App:Application
Err:Error
Unf:Incomplete

FileName:Results
ExptName:FileNames
SrchName:Search
SelectName:Selection
HotlistName:Hotlist

HotlistAddT:Add search to hotlist
HotlistRenameT:Rename hotlist entry
HotlistAddB:Add
HotlistRenameB:Rename

DeftHistName:<untitled search>

# Messages & Errors

NoSprites:The application sprites file could not be opened.
BadTemplate:FWindow template '%0' not found.
NoMemFileBlock:There was not enough free memory available to create the file descriptor block.
NoMemSearchCreate:There was not enough free memory available to create the search.
NoMemResultsCreate:There was not enough free memory available to create the results window.
NoMemStoreParams:There was not enough free memory available to store the search parameters.
BadFiletype:Type '%0' was not recognised.
BadDate:'%0' is not a valid date.
BadPath:The path '%0' can not be found.
EmptyPath:The list of paths contains an empty string.
BadLoadPaths:The configured search paths contain some invalid locations. Do you wish to edit them?
BadLoadPathsB:Edit,Ignore
BadConfigPaths:The search paths contain some invalid locations. Do you wish to correct these?
BadConfigPathsB:Correct,Ignore



BadFile:This file is not compatible with the version of Locate currently running.
FileError:There was an error while loading or saving the file: the operation has been aborted.
FileUnrec:The file format was not understood: the operation has been aborted.
FileMem:There was not enough memory to load the file: the operation has been aborted.






NoFiles:No matching objects were found
NotHere:(The object is no longer in this location)
NameTooLong:Filename too long

Searching:Searching in %0
Found:%0 object(s) found%1
Errors:; %0 error(s) occurred

BadRdrwHndl:The data for the window redraw can not be found.
DragSave:To save, drag the icon to a directory viewer.
RAMXferFail:The file was not received correctly by the other application.
XferFail:Transfer failed: receiver died.
NoLoadNow:Searching is in progress: load file once completed.
AbrtSrch:The current search has been stopped.
NotThere:The selected object is no longer in the specified location.
NotThereDrag:Some of the selected items were no longer in the locations specified.
PathBufFull:There was not enough space in the search path buffer to add the new path.
NoPaths:There were no paths specified to search.
TypeBufFull:There was not enough space in the filetype field to add the new type.
URLFailed:Could not find an application to launch the given URL.

# Hotlist Menu.

Hotlist:Hotlist
HotlistNone:No Entries
HotlistNew:Saved Search
HotlistNoName:You must enter a name for the hotlist entry.
HotlistDupName:This name is already used in the hotlist.
HotlistNoMem:Unable to allocate memory for the new hotlist entry.

# Filename window menus.

NameMode0:is not important
NameMode1:is equal to
NameMode2:is not equal to
NameMode3:contains
NameMode4:does not contain

# Size options window menus.

SizeMode0:not important
SizeMode1:equal to
SizeMode2:not equal to
SizeMode3:greater than
SizeMode4:less than
SizeMode5:between
SizeMode6:not between

SizeUnit0:bytes
SizeUnit1:Kb
SizeUnit2:Mb

# Date options window menus.

DateMode0:at any time
DateMode1:at
DateMode2:at any time but
DateMode3:after
DateMode4:before
DateMode5:between
DateMode6:not between

# Months

Month1:January
Month2:February
Month3:March
Month4:April
Month5:May
Month6:June
Month7:July
Month8:August
Month9:September
Month10:October
Month11:November
Month12:December

# Age options window menus.

AgeMode0:any age
AgeMode1:exactly
AgeMode2:any age but
AgeMode3:less than
AgeMode4:more than
AgeMode5:between
AgeMode6:not between

AgeUnit0:minutes
AgeUnit1:hours
AgeUnit2:days
AgeUnit3:weeks
AgeUnit4:months
AgeUnit5:years

# Filetype options window.

TypeMode0:of any type
TypeMode1:of type
TypeMode2:not of type

FileMenu:Filetypes

# Contents options window.

ContentsMode0:are not important
ContentsMode1:include
ContentsMode2:do not include

# Menus

HistoryMenu:History

# Interactive help information.

Help.IconBar:\TLocate application.|M\Ssearch for a file, application or directory.|M\A to re-use the last search parameters.|MDrag a file, directory or application here to search in that location.

Help.ProgInfo:This \w displays information about Locate.
Help.ProgInfo.Website:\Sopen the Locate home page in your web browser, if one has been seen.

Help.Search.Cancel:\Sclose the search window without carrying out a search.|M\Areset all the fields to their default values.
Help.Search.Search:\Sclose the search window and look for the matching files.
Help.Search.Name:Enter the filename to search for.|MWildcards can be used: to match any single character enter # and to match any zero or more characters enter *.|MLeave the field blank to match any name.
Help.Search.Size:\Ssee the search options concerning the size of files.
Help.Search.Date:\Ssee the search options concerning the date files were last modified or the age of files.
Help.Search.Type:\Ssee the search options concerning the type of object (file, directory, or application).
Help.Search.Attributes:\Ssee the search options concerning the object attributes (read and write access, locked).
Help.Search.Contents:\Ssee the search options concerning the file contents.
Help.Search.Icon11:Drag \s to set the search directory.|MDouble click \s to open the search directory.
Help.Search.ModeM:\Sset the type of match to be used for filenames.
Help.Search.Mode:\Ttype of match to be used for filenames.
Help.Search.Case:\Stoggle whether the case of filenames is ignored.
Help.Search.Options:\Stoggle the display of the search options.
Help.Search.StoreAll:\Stoggle whether the full details of the search directory are recorded to allow future off-line searches.
Help.Search.ImageFS:\Stoggle whether the contents of Image Filing System directories are searched (eg. ArcFS, SparkFS).
Help.Search.Suppress:\Stoggle whether errors from filing systems are reported in an error box or logged in the results window.
Help.Search.Path:Enter the directories to search in, separated by commas.|MDrag a directory or application here to add it to the list.|MDrag a file here to add its parent directory to the list.|MShift-drag objects to replace the list.
Help.Search.FullInfo:\Stoggle if a full info display is used for the results of this search.

Help.Size.ModeM:\Sset the type of match to be used for the file size.
Help.Size.Mode:\Ttype of match to be used for the file size.
Help.Size.Size?:Enter a size here, depending on the type of match selected above.|MThe units are set on the right.
Help.Size.UnitM?:\Sset the units used for the size on the left.
Help.Size.Unit?:\Tunit that is used for the size on the left.

Help.Date.Date:\Sset the modification date in terms of calendar dates.
Help.Date.Age:\Sset the modification date in terms of the age of the objects.
Help.Date.DModeM:\Sset the type of match to be used for the modification date.
Help.Date.DMode:\Ttype of match to be used for the modification date.
Help.Date.Date?:Enter a date here, depending on the type of match selected above.|MTo specify to the nearest day, enter in the form DD/MM/YYYY.|MTo specify to the nearest minute, enter in the form DD/MM/YYYY.HH:MM.
Help.Date.Set?:\Sset the date on the left, using a dialogue box to enter the various components easily.
Help.Date.AModeM:\Sset the type of match to be used for the object age.
Help.Date.AMode:\Ttype of match to be used for the object age.
Help.Age.Age?:Enter an age here, depending on the type of match selected above.|MThe units are set on the right.
Help.Age.UnitM?:\Sset the units used for the age on the left.
Help.Age.Unit?:\Tunit that is used for the age on the left.

Help.Type.Files:\Stoggle whether files will be matched.|MIf they are to be matched, the types of files to be included or ignored can be set on the right.
Help.Type.Dirs:\Stoggle whether directories will be matched.
Help.Type.Apps:\Stoggle whether applications will be matched.
Help.Type.Mode:\Ttype of match to be used for the filetype.
Help.Type.ModeM:\Sset the type of match to be used for the filetype.
Help.Type.Types:Enter the filetypes required for matched or ignored files here.|MTypes can be entered as names (such as 'Text') or as a numbers (such as 'FFF') or as a mixture of the two.|MUse commas to separate multiple filetypes.
Help.Type.TypesM:\Sselect a filetype from those currently recognised and add it to the list.|M\Asee the list in filetype order, not alphabetical.

Help.Attributes.Lock:\Stoggle whether the 'locked' attribute is matched.|MThis attribute determines if an object can be deleted or not.
Help.Attributes.LockYes:\Smatch files that are protected from deletion.
Help.Attributes.LockNo:\Smatch files that can be deleted.
Help.Attributes.ReadO:\Stoggle whether the 'owner read' attribute is matched.|MThis attribute determines if an object can be loaded or run by the user who created it.
Help.Attributes.ReadOYes:\Smatch files that can be opened or run by the user who created them.
Help.Attributes.ReadONo:\Smatch files that can not be opened or run by the user who created them.
Help.Attributes.WriteO:\Stoggle whether the 'owner write' attribute is matched.|MThis attribute determines if an object can be changed by the user who created it.
Help.Attributes.WriteOYes:\Smatch files that can be changed by the user who created them.
Help.Attributes.WriteONo:\Smatch files that can not be changed by the user who created them.
Help.Attributes.ReadP:\Stoggle whether the 'public read' attribute is matched.|MThis attribute determines if an object can be loaded or run by any user on a network.
Help.Attributes.ReadPYes:\Smatch files that can be opened or run by anyone on a network.
Help.Attributes.ReadPNo:\Smatch files that can not be opened or run by anyone on a network.
Help.Attributes.WriteP:\Stoggle whether the 'public write' attribute is matched.|MThis attribute determines if an object can be changed by any user on a network.
Help.Attributes.WritePYes:\Smatch files that can be changed by anyone on a network.
Help.Attributes.WritePNo:\Smatch files that can not be changed by anyone on a network.

Help.Contents.Mode:\Ttype of match to be used for the file contents.
Help.Contents.ModeM:\Sset the type of match to be used for the file contents.
Help.Contents.Text:Enter the text to check for here.
Help.Contents.Case:\Stoggle whether case is ignored or checked in the file contents search.
Help.Contents.Ctrl:\Stoggle whether control chars can be entered into the text field.

Help.SetTime.Cancel:\Sclose the date and time \w and forget any changes made.|M\Aforget the changes made since the window was opened.
Help.SetTime.Set:\Sclose the date and time \w and insert the date into the search \w.|M\A insert the date without closing the \w.
Help.SetTime.MonthM:\Sset the month.
Help.SetTime.Month:\Tmonth.
Help.SetTime.Day:Enter the day of the month.
Help.SetTime.DayDown:\Sdecrease the day by one.|M\Aincrease it instead.
Help.SetTime.DayUp:\Sincrease the day by one.|M\Adecrease it instead.
Help.SetTime.Year:Enter the year in full (four digits).
Help.SetTime.YearDown:\Sdecrease the year by one.|M\Aincrease it instead.
Help.SetTime.YearUp:\Sincrease the year by one.|M\Adecrease it instead.
Help.SetTime.SetTime:\Stoggle if the time is to be specified as well.|MIf not, the date will be given accurate to one day.
Help.SetTime.Hour:Enter the hour, using the 24-hour clock.
Help.SetTime.Minute:Enter the minute.
Help.SetTime.HourDown:\Sdecrease the hour by one.|M\Aincrease it instead.
Help.SetTime.HourUp:\Sincrease the hour by one.|M\Adecrease it instead.
Help.SetTime.MinuteDown:\Sdecrease the minute by one.|M\Aincrease it instead.
Help.SetTime.MinuteUp:\Sincrease the minute by one.|M\Adecrease it instead.

Help.Hotlist:\Thotlist \w.|MDouble click \s to open one of the searches in the search dialogue.|M\Dre-order entries or save them out as files.|MDrag settings or hotlist files here to add them to the list.

Help.HotlistPane.Save:\Ssave the hotlist contents into a separate file.|M\Asave the selected hotlist entry as a search file.
Help.HotlistPane.Select:\Sselect all of the hotlist entries.|M\Adeselect them all.
Help.HotlistPane.Run:\Sopen the selected hotlist entry in the search dialogue.
Help.HotlistPane.Rename:\Srename the selected hotlist entry.
Help.HotlistPane.Delete:\Sdelete the selected hotlist entries.
Help.HotlistPane.Default:\Stoggle whether the selected hotlist entry is used for the default search.

Help.Choices:\Tchoices window for Locate.
Help.Choices.Apply:\Sclose the choices \w and use the changes|M\Ause the changes.
Help.Choices.Save:\Sclose the choices \w, using the changes and saving them to disc.|M\Ause the changes and save them.
Help.Choices.Cancel:\Sclose the choices \w and forget any changes made.|M\Aforget the changes made since the window was opened.
Help.Choices.Path:Enter the directories to search in, separated by commas.|MDrag a directory or application here to add it to the list.|MDrag a file here to add its parent directory to the list.|MShift-drag objects to replace the list.
Help.Choices.StoreAll:\Stoggle whether the full details of the search directory are recorded to allow future off-line searches.
Help.Choices.ImageFS:\Stoggle whether the contents of Image Filing System directories are searched by default.
Help.Choices.Suppress:\Stoggle whether errors from filing systems are reported in an error box or logged in the results window by default.
Help.Choices.FullInfo:\Stoggle if a full info display is used by default for new searches.
Help.Choices.PlugQuit:\Stoggle how Locate behaves when started as a Filer Action plugin.|MIf on, Locate will not place an icon on the icon bar and will quit as soon as all its windows have been closed.
Help.Choices.PlugOpen:\Stoggle if a search window is opened when a Filer Action search is started.|MIf not, the search begins immediately with default parameters, which can be changed using the results window menu.
Help.Choices.Scroll:\Stoggle whether the results window is scrolled to the end when new matches are added.
Help.Choices.PathVal:\Stoggle whether the configured search paths (above) are validated when Locate loads.

Help.Results:\Tlist of files that were located.|MDouble click \s to load a file, run an application or open a directory.|MDouble click \a to open an object's parent directory.|M\Sselect an object, or \a to add or remove objects from a selection.

Help.ObjectInfo:This \w displays information about the currently selected object.

Help.SaveAs.Save:\Ssave the file with the name entered above.
Help.SaveAs.Cancel:\Scancel the save and close the window.
Help.SaveAs.Name:Enter the name to give the file here.
Help.SaveAs.Icon3:Drag this icon to a directory window to save the file.
Help.SaveAs.Selection:\Stoggle whether to save all the items, or just the selected entries.

# HelpSV00:\Ssave the results in a file with the name entered above.
# HelpSV01:\Ssave the filenames in a text file with the name entered above.
# HelpSV02:\Ssave the search parameters from this search in a file with the name entered above.
# HelpSV03:\Ssave the search parameters from the window in a file with the name entered above.
# HelpSV1?:\Scancel the save and close the window.
# HelpSV2?:Enter the name to give the file here.
# HelpSV30:Drag this icon to a directory window to save the results.
# HelpSV31:Drag this icon to a directory window to save the filenames.|MDrag it to another application to copy the names there directly.
# HelpSV32:Drag this icon to a directory window to save the search parameters used in this search.
# HelpSV33:Drag this icon to a directory window to save the current search parameters.
# HelpSV40/HelpSV41:\Stoggle whether to save all the results or just the selected entries.
# HelpSV42/HelpSV43:\This icon is not used as there can never be a selection of the search parameters.

Help.IconBarMenu.00:\Rsee information about Locate.
Help.IconBarMenu.01:\Sread the online help.
Help.IconBarMenu.02:\Rto re-use a previous search from the history list.|M\Sopen the hotlist \w for editing its entries.
Help.IconBarMenu.02??:\Sopen this hotlist entry in the search dialogue.
Help.IconBarMenu.03:\Schange the Locate options.
Help.IconBarMenu.04:\Squit Locate.

# Help.SearchMenu.00:\Sopen a search window based on this previous search.

Help.SearchMenu.00:\Rsave the current search options so they can be re-loaded into Locate.
Help.SearchMenu.01:\Ssave the current search options in the hotlist.

Help.ResultsMenu.00:\Rchange the display options.
Help.ResultsMenu.0000:\Sdisplay only the object paths.
Help.ResultsMenu.0001:\Sdisplay the object paths and file information.
Help.ResultsMenu.01:\Rsave the results, path names or search parameters.
Help.ResultsMenu.0100:\Rsave the results as a file that can be re-loaded into Locate.
Help.ResultsMenu.0101:\Rsave the filenames (all or those currently selected) as a text file.
Help.ResultsMenu.0102:\Rsave the search options so they can be re-loaded into Locate.
Help.ResultsMenu.02:\Sselect all the objects in the window.
Help.ResultsMenu.03:\Sclear the selected objects in the window.
Help.ResultsMenu.04:\Rto see information about the selected object.
Help.ResultsMenu.05:\Sopen the parent of the selected object.|MThis can also be done by an \a double-click on the object itself.
Help.ResultsMenu.06:\Scopy the filenames (all or those currently selected) to the global clipboard.
Help.ResultsMenu.07:\Sopen a new search window with the same search options.
Help.ResultsMenu.08:\Ssave the options of the current search in the hotlist.
Help.ResultsMenu.09:\Sstop the current search, while keeping those results that have already been found.

Help.HotlistMenu.00:\Rto make changes to the currently selected entries.
Help.HotlistMenu.0000:\Rsave the settings of the currently selected hotlist entry into a separate file.
Help.HotlistMenu.0001:\Stoggle whether the currently selected hotlist entry is used for the default search.
Help.HotlistMenu.0002:\Srename the currently selected hotlist entry.
Help.HotlistMenu.0003:\Sdelete the currently selected entries from the hotlist.
Help.HotlistMenu.01:\Sselect all of the hotlist entries.
Help.HotlistMenu.02:\Sclear the current selection.
Help.HotlistMenu.03:\Rsave the hotlist out to disc in a separate file.

Help.NameModeMenu.00:\Signore the filename when matching objects.
Help.NameModeMenu.01:\Smatch objects whose names exactly match a given string.
Help.NameModeMenu.02:\Smatch objects whose names do not exactly match a given string.
Help.NameModeMenu.03:\Smatch objects whose names contain a given string.
Help.NameModeMenu.04:\Smatch objects whose names do not contain a given string.

Help.SizeModeMenu.00:\Signore size when matching objects.
Help.SizeModeMenu.01:\Smatch objects which are exactly a given size.
Help.SizeModeMenu.02:\Smatch objects which are anything but a given size.
Help.SizeModeMenu.03:\Smatch objects which are larger than a given size.
Help.SizeModeMenu.04:\Smatch objects which are smaller than a given size.
Help.SizeModeMenu.05:\Smatch objects whose size falls between two values.
Help.SizeModeMenu.06:\Smatch objects whose size is anything but between two values.

Help.SizeUnitMenu.00:\Sspecify file size in terms of bytes.
Help.SizeUnitMenu.01:\Sspecify file size in terms of kilobytes (multiples of 1024 bytes).
Help.SizeUnitMenu.02:\Sspecify file size in terms of megabytes (multiples of 1024 kilobytes).

Help.DateModeMenu.00:\Signore date when matching objects.
Help.DateModeMenu.01:\Smatch objects which were last modified at a specific date and time.
Help.DateModeMenu.02:\Smatch objects which were last modified at any time but a specific date and time.
Help.DateModeMenu.03:\Smatch objects which were last modified after a specific date and time.
Help.DateModeMenu.04:\Smatch objects which were last modified before a specific date and time.
Help.DateModeMenu.05:\Smatch objects which were last modified between two specific dates and times.
Help.DateModeMenu.06:\Smatch objects which were last modified at any time but between two specific dates and times.

Help.MonthMenu.00:\Sset the month to January.
Help.MonthMenu.01:\Sset the month to February.
Help.MonthMenu.02:\Sset the month to March.
Help.MonthMenu.03:\Sset the month to April.
Help.MonthMenu.04:\Sset the month to May.
Help.MonthMenu.05:\Sset the month to June.
Help.MonthMenu.06:\Sset the month to July.
Help.MonthMenu.07:\Sset the month to August.
Help.MonthMenu.08:\Sset the month to September.
Help.MonthMenu.09:\Sset the month to October.
Help.MonthMenu.0a:\Sset the month to November.
Help.MonthMenu.0b:\Sset the month to December.

Help.AgeModeMenu.00:\Signore age when matching objects.
Help.AgeModeMenu.01:\Smatch objects which are exactly a given age.
Help.AgeModeMenu.02:\Smatch objects which are any age but a given age.
Help.AgeModeMenu.03:\Smatch objects which are younger than a given age.
Help.AgeModeMenu.04:\Smatch objects which are older than a given age.
Help.AgeModeMenu.05:\Smatch objects whose age falls into a given range.
Help.AgeModeMenu.06:\Smatch objects whose age does not fall into a given range.

Help.AgeUnitMenu.00:\Sspecify the age in terms of minutes.
Help.AgeUnitMenu.01:\Sspecify the age in terms of hours.
Help.AgeUnitMenu.02:\Sspecify the age in terms of days.
Help.AgeUnitMenu.03:\Sspecify the age in terms of weeks.
Help.AgeUnitMenu.04:\Sspecify the age in terms of months.
Help.AgeUnitMenu.05:\Sspecify the age in terms of years.

Help.TypeModeMenu.00:\Signore the filetype when matching files.
Help.TypeModeMenu.01:\Smatch files which have one of the listed filetypes.
Help.TypeModeMenu.02:\Smatch files which do not have one of the listed filetypes.

Help.FileTypeMenu.00:\Sadd untyped files (those with a load and execution address set) to the list.
Help.FileTypeMenu.??:\Sadd this filetype to the list.

Help.ContentModeMenu.00:\Signore file contents when matching objects.
Help.ContentModeMenu.01:\Smatch files which contain a given piece of text.|MDirectories and Applications will always be matched.
Help.ContentModeMenu.02:\Smatch files which do not contain a given piece of text.|MDirectories and Applications will always be matched.
